Nitrided Sintered Materials
PANACEA
Specification of PANACEA material PSD refer to Malvern Mastersize 3000 Analysis
|
Main Type |
PSD, µm |
Nitrogen level, ppm |
Typical oxygen level ppm |
Typical sintering density, g/cm3 |
Mechanical Property |
||
|
D50 |
Typical accumulated size |
||||||
|
Panacea-12 |
Normal size type |
11.5~12.5 |
90%≤26 |
2000~3000 |
≤1500 |
7.60~7.70 |
σb:980-1120 MPa |
|
Panacea-11 |
Super fine size type |
10.5~11.5 |
90%≤22 |
3000~4500 |
|||
SEM of superfine PANACEA Completely austenitized structure sintered at 1260℃ with a density of 7.72g/cm³ Feature after heat-treatment
Nitrided 17-4N
PSD refer to Malvern Mastersize 3000 Analysis
|
TYPE |
PSD,μm |
Typical Oxygen level,ppm |
Sintering density, g/cm³ |
Sintered void ratio,% |
Hardness Hv10 |
Magnetic permeability,μm |
Mechanical Property |
||
|
17-4N |
D10 |
D50 |
D90 |
≤3500 |
7.62~7.70 @1300~1340℃/ 1atm /N² |
1~2.5 |
180~210 |
<1.01 |
σb:600-800 MPa |
|
<3.2 |
7~8.5 |
<21 |
7.70~7.75 @1220~1280℃/ 80KPa /N² |
||||||
Completely austenitized structure after sintered at 1260℃ with a density of 7.75g/cm³